Actually the nut does not hold the rotor on. Your brake caliper does that. The nut holds the front hub on. correct and the torque setting for the front hub nut is ..284 ft pounds
A front axle holds the front wheels on and on front-wheel drive vehicles transmits engine torque to the wheels. --Ken
185 to 260 ft lbs this is the front center nut that holds axle and front wheel bearing together not wheel lug nuts
if you mean the large nut that holds the hub on, Haynes repair manual says 185 FT-LBS
who holds the mariners career record for grand slams how many
The size of the nut that holds the front wheel bearing assembly on a 1997 Pontiac Grand Prix is typically a 30mm. It is important to use the correct size socket to avoid rounding the nut during removal or installation. Always refer to the vehicle's service manual for the most accurate specifications.
underneath the car on the passenger side just in front of the rear wheel there is a bracket which holds the fuel filter,it is a torque screw which holds it on. it has two clips which hold the pipes on either end,these can be tricky to get off. hope this helps.
The gas tank on the 2003 Suzuki Grand-Vitara holds 16.9 gal..
The gas tank on the 2006 Suzuki Grand-Vitara holds 17.4 gal..
As far as I can tell the front wheel hub is supplied as a unit with no adjustment provided for. The pinion nut holds the drive axle on, it should be torqued to 74 ft. lbs per the factory service manual.
staff
Suzuka
The gas tank on the 2010 Suzuki SX4 holds 13.2 gal..