Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
Front caliper bolts 25 ft/lb Mounting bracket bolts 80ft/lb
Torque specs for brake caliper bolts 2005 mazda 6
_________________________________________Front caliper bracket mounting bolt-148 ft-lb Front caliper guide pin bolt-74 ft-lb
You usually have to take off the brake caliper, then the caliper mounting bracket to free the rotor.
The torque for the brake hose to the caliper mounting bolt is 35 ft. pounds. For the adapter mounting bolt it's 16 ft. pounds. For the adapter to the knuckle mounting bolt, the torque is 50 ft. pounds.
Try about 25 lb. ft. for the caliper bracket.
For the Chevrolet S-10 model years from 1982 to 1993, the torque for the caliper mounting bolts is 37 ft. lbs. The torque setting for the brake hose-to-caliper bolt is 32 ft. lbs.
You first remove the caliper, then the caliper mounting bracket. Then the rotor is free.
75 ft lbs
32ftlbs for the pin bolts
The caliper mounting bolts, both in the front and in the rear, require 39N-m, or 28.9 ft-lbs of torque.