The torque specification for the front hub bearing nut on a 1999 Plymouth Breeze is typically around 150 ft-lbs. It's important to ensure that the nut is properly torqued to maintain the integrity of the wheel bearing assembly. Always refer to the vehicle's service manual for the most accurate and specific torque requirements and procedures.
The battery is inside the left front fender, in front of the tire on a 1998 Plymouth Breeze.
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
Front hub/wheel bearing torque is 190-210Nm.
32 m
Between the front of the engine on the bottom and the radiator
Using new bolts, torque the front hub/bearing assembly to 96 ft-lbs.....
On the front of the engine, near the rad fans.
It is under the inner fender liner in front of the driver side front tire.
Since the Plymouth Breeze came only with a four cylinder, the oil pump would be driven directly off the crankshaft at the front of the motor.
It is 175 ft lbs for the front wheel bearing of a grand cherokee
2003 SATURN L 300 front axle torque spec
what is the torque on front wheel bearings for 1998 honda accord