answersLogoWhite

0

This applies to all 1979-1985 GM E-bodies:

Steel wheels were 15x6, not sure of the width on the aluminum or real wire wheels. The bolt pattern on all wheels is 5x4.75in. (120.7 mm)

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Can twenty two inch rims fit on a 1984 Buick Riviera?

yes it does i got 1985 buick riviera on 22"


Where is the power steering reservoir on an 1984 Buick Riviera?

Should be directly behind altinator and below upper rad hose.


What is the firing order for a 1984 Buick Riviera 5.0L v8?

1-8-4-3-6-5-7-2


What is the bolt pattern on a 1984 buick regal?

4.75


What years are compatible with 1985 Buick Riviera 5.0?

The 1985 Buick Riviera with a 5.0-liter engine shares its platform with several models from the same era, particularly the 1984 to 1985 Buick Riviera. Additionally, parts from other GM vehicles that utilize the same engine and components, such as some models of the Oldsmobile Toronado and Cadillac Eldorado from the mid-1980s, may also be compatible. However, for the best fit and compatibility, sticking to the Riviera of the same model years is recommended.


Where is the starter located on a 1984 Buick Riviera?

take off the passenger side front tire and you will be able to see it on the bottom is the engine the battery cable is hook to it and it will be easy to change


When did ford change the wheel bolt pattern on it's f350?

1984


What is the bolt pattern on a 1984 Buick Lesabre?

The bolt pattern for a 1984 Buick LeSabre is 5x4.75 inches (5x120.65 mm). This means there are five bolt holes arranged in a circle with a diameter of 4.75 inches. When selecting wheels, it's essential to ensure they match this bolt pattern for proper fitment.


How much does a 1984 Buick Century weigh?

a 1984 buick century weighs about 4,000 lbs.


How replace oil pan gasket 1984 Buick Riviera?

To replace the oil pan gasket on a 1984 Buick Riviera, first, ensure the engine is cool and safely supported. Drain the engine oil and remove the oil pan by unbolting it from the engine block, taking care to detach any components obstructing access. Clean the mating surfaces thoroughly, install a new gasket, and reattach the oil pan, tightening the bolts to the manufacturer's specifications. Finally, refill the engine with fresh oil and check for leaks.


What is the bolt pattern on a 1984 Oldsmobile cutlass?

wheel bolt patern is4 3/4 on both 14 and 15 inch wheel


How to set the timing on a 1984 Buick Riviera?

Install timing light on #1 cylinder Remove and plug vacuum advance line from distributor Highlight timing marks crankshaft and stationary Loosen distributor hold down Start vehicle and move distributor to align marks