VW's
True. But a long list of other cars foreign and domestic
5 lug rims will not fit on a 4 lug car.
bolt pattern for what?? Give more info... If its the rims use a star pattern for 5 lugs for a 4 bolt pattern use a "X" pattern to torx down you pimping rims
No, it's literally impossible to fit a 5 bolt to a 4 bolt, even if it's universal.
No the bolt pattern for the jeep is 4 1/2" and the regal 4 3/4"
NoNo
To determine if 17-inch ADR Model Flite 4 rims will fit on a Honda S2000, you need to check the bolt pattern, offset, and width of the rims. The S2000 typically has a 5x114.3 bolt pattern, so ensure the rims match this specification. Additionally, verify that the offset and width of the rims are suitable for the S2000 to avoid clearance issues with brakes and suspension components. If these parameters align, the rims should fit properly.
Depends. 4 lug: 4x100mm 5 lug: 5x110mm
You would have to measure the bolt circle diameter, stud diameter, center hub diameter and back spacing on the trailer then match the new rims to those specs.
4 bolt their stronger better lasting
No, not all Honda ATV rims have the same bolt pattern. Different Honda ATV models and years can have varying bolt patterns, typically ranging from 4 to 8 bolts per wheel. It's essential to check the specific bolt pattern for your ATV model to ensure compatibility when purchasing new rims. Always consult your owner's manual or a reliable source for precise specifications.
Considering I dont know of any 8 lug vehicles other than trucks, if you are speaking of Enkei or other aftermarket rims, the 8 lugs are just two different spaced sets of 4. A stock 8 bolt rim is going to have a bigger diameter bolt pattern than any 4 bolt. Also, there would never be enough clearance on the body to put an 8 bolt wheel.
Pretty much any wheel will fit on any car unless the wheel takes 5 bolts and the car takes 6 ^ That's not true, the rims off of my 83 GMC pick-up wont fit on my 89 Camaro and they are both 5 bolt. It all depends on bolt pattern, the GMC is a 5 x 5 1/2 and the Camaro is a 5 x 4 3/4 all that means is that it is a 5 hole with a 4 3/4" diameter around the holes. So if the 07 Vette rims have the same bolt pattern as the 88 then it will fit but i believe the spacing is a little different.