need more information to answer your question.
Mobile synthetic!
its a closed for life transmition
At great expense, considering that you will probably do a lot of damage trying this.
To replace the license plate bulb on a 2006 Chevy Cobalt, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver or a similar tool to gently pry off the light cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover. Finally, test the new bulb by turning on the vehicle's lights to ensure it works properly.
A 2006 Chevy Cobalt typically uses 5 quarts of oil with a filter change if it has a 2.2L engine. If it has the 2.4L engine, it also requires about 5 quarts. It's recommended to use 5W-30 motor oil for optimal performance. Always check the owner’s manual for specific recommendations.
The oil drain plug for a 2006 Chevy Cobalt typically requires a 15mm socket for removal. It's important to ensure you have the correct size to avoid stripping the plug. Always use a torque wrench to tighten the plug to the manufacturer's specifications after changing the oil.
5
use your key in the trunk lid. you can also pull back seat down and open latch from inside.
If the engines are identical, yes.
yes
My advice would be to use an AC/Delco filter in your Chevy. AC/Delco makes one of the best filters you can buy. Other than that, Purolator or Wix make excellent filters.
A Chevy Cobalt has a timing belt which connects the camshaft and crankshaft. Older model cars often use less effective timing chains.