134-a
134-A
A 97 Mercury Villager should use r134a type freon. The valve size is designed so that the r12 fittings cant accidentally be used.
R-134a is used in all vehicles 1995 and later.
It is R134a. If it is serviced, DO NOT use any with leak stop as that will ruin a repair shops equipment.
It is 134.
The 1993 Mercury Villager takes 22" replacement windshield wiper blades on both sides front.
r134
Yes, the 1993 Mercury Villager was a 1992 Nissan Quest. The last year Nissan used a Carburetor on a Quest. Fuel injection system replaced the carburetor in 1993.
All cars prior to 1995 used Freon R-12. Since then, most have switched to R-134a. The two can not be mixed. That should be marked on or near the fill port.
The OBD-1 diagnostic connector is located on the back of the block beside the starter. A series of jumper wire locations are used in conjunction with watching the CHECK ENGINE light.
To remove the caliper on a 1995 Mercury Villager, you typically need a 12mm or 13mm socket wrench, depending on the specific caliper bolts used. It's best to check the exact size of the bolts on your vehicle, as there can be slight variations. Make sure to use the appropriate tools to avoid stripping the bolts.
I just did mine tonight,used a t40