The oil pressure may vary depend on mileage. However, typically on a 1988 GM engine should be around 14.25 ohms or more.
Should be the 700R4
either a 305 or a 350 V8.
200hp and 260 torque
What I found that its 1986-1988 I have the same 305 sitting in my garage
Set the points for 30 degrees dwell. 1988 305 has electronic ignition.NO POINTS.last year for points was 1974
Assuming you're referring to a 1988 IROC-Z, it could have either a 305 TBI, 305 TPI or a 350 TPI
No. There were major engine changes between those years.
rigth behind the distributor.
The normal oil pressure on a GM 305 engine is between 40 and 60 PSI depending on the model year. High oil pressure is needed to allow for proper circulation through the engine.
the pressure in the engine will stop it from starting (oh 305's are shite)
Right behind the distributor on the engine block.
If the ports on the heads on the 88 are the same as your 76 intake it should work.