0
What else can I help you with?
Where is the obd port on 2001 dodge ram 2500?
Under the dash on the driver side.
Where is the fill port for the ac in a dodge ram van 2500?
Left side under hood.
Where is the AC low-pressure port for the a 98 Dodge Dakota?
the low pressure port is right on top of the comperssor
Where is the ac low pressure port on a 2000 Dodge Intrepid?
The AC low pressure port on a 2000 Dodge Intrepid is located on the side of the AC accumulator. It is positioned in the left, rear area of the engine compartment.
Is the ac low pressure port location on a 2000 dodge caravan the same as a 1999 dodge caravan?
Yes
Where is the low port for recherging the ac on a 1997 dodge neon?
The 1997 Dodge Neon air conditioning recharging port can be found on the top of the air conditioner compressor. The low pressure port will be labeled as such.
Where is the fuel pressure port on a 1997 dodge 1500 truck?
If you look at the fuel rail. The rail that has the injectors connected to it. Some where on it (usually on the front side of the engine) there should be a port that should have a plastic cap covering it. Remove this cap and then you can attach a fuel pressure gauge or whatever to it. Good luck.
Where do you put r-134 at in a 2001 dodge ram?
Low pressure port Larger line from the compressor
Where is the computer diagnostic port on a Dodge 2500 pickup?
while sitting in the drivers seat it is under the dash board near R leg for OBD reader
Where do you find the ObdII port on 2001 dodge ram 2500?
Under the dash on the driver side.Under the dash on the driver side.
Where is the low pressure port of ac system 1998 Dodge Ram?
one port is in the front pass side the other is on the canister near the fire wall
Where is the low pressure ac port on a 2004 Dodge 1500 Hemi?
On a 2004 Dodge Ram 1500 with a Hemi engine, the low-pressure AC port is located on the passenger side of the engine bay. It is typically found on the larger diameter refrigerant line, closer to the firewall. The port is usually capped with a plastic cover and can be identified by its blue color. Always ensure the engine is off and the system is not under pressure before attempting to access the port.
