front should be 4x6 in the doors 6x9 in the back deck u have to remove the back seat with star bolt the back brake light in window and the cover to get to the back deck
5.25 or 5 1/4
Front speakers are in the door. remove screws on the door panel, then remove the panel and you'll see the speaker
To remove the passenger side door panel on a 1992 Buick Roadmaster, start by disconnecting the negative battery cable to avoid any electrical issues. Then, remove any screws securing the panel, typically located near the armrest and behind the door handle. Carefully pry off the panel using a trim removal tool to avoid damaging the clips, and gently lift it away from the door once all fasteners are removed. Finally, disconnect any electrical connectors for window controls or speakers before fully detaching the panel.
What size speakers go on the rear of a 2001 Buick lesaber
no
The front door speakers in a 2003 buick century are 5 1/4 inches.
The 2003 Buick LeSabre has speakers in the doors of both the driver and passenger side. These speakers are generally about 15 inches.
You will have to open the door panel too complicated to describe. Watch You tube videos and search for replacing windows motor plenty of videos and this might help.
To replace the front driver side window motor on a 1992 Buick Roadmaster, first disconnect the car battery to ensure safety. Remove the door panel by unscrewing any visible screws and gently prying off clips to access the window motor. Disconnect the wiring harness from the old motor, unbolt it from the regulator, and replace it with the new motor. Finally, reassemble the door panel and reconnect the battery, testing the window to ensure proper operation.
Front door: 5-1/4" circular
The interior light door switch in a Buick Roadmaster is responsible for activating the interior lights when a door is opened. Typically located in the door frame or on the door itself, this switch is a crucial component for ensuring visibility inside the vehicle. If the lights do not come on when a door is opened, the switch may be faulty or misaligned. Troubleshooting often involves checking the switch for proper function and ensuring that the wiring is intact.
4x6 hard to replace!!!