Im the one who asked the question
It is the 13mm bolt on the front of the oil pan, just below the oil filter.
5 x 115
To remove the harmonic balancer on a 2002 Buick Rendezvous, first, ensure you have the proper tools, including a harmonic balancer puller. If the bolt head is stripped, you may need to use a bolt extractor or try to grip it with locking pliers. Typically, the harmonic balancer bolt is tightened to the right (clockwise), so you'll need to turn it left (counterclockwise) to remove it. Always refer to a service manual for specific instructions and torque specifications.
5x115
The transmission on a 2002 Hyundai will have a drain bolt located underneath it. Loosen the bolt and drain the old fluid into a pan. Once done use Hyundai recommended transmission fluid and pour it in.
To remove a spinning battery hold down bolt on a 2003 Buick Rendezvous, first, try applying some penetrating oil to loosen any rust or corrosion. If the bolt continues to spin, use a pair of locking pliers or vice grips to grip the head of the bolt while turning the nut or the other side with a wrench. If that doesn't work, you may need to carefully cut the bolt with a Dremel tool or a similar cutting tool, ensuring not to damage surrounding components. Once removed, replace the bolt for proper reinstallation.
To change the cam sensor on a 2004 Buick Rendezvous, first disconnect the battery to ensure safety. Locate the camshaft position sensor, usually found near the engine's timing cover. Remove the sensor's electrical connector and unscrew the mounting bolt, then carefully pull out the old sensor. Replace it with the new sensor, secure it with the bolt, reconnect the electrical connector, and finally reconnect the battery.
The oil drain plug on a 2002 Road King motorcycle is near the kick stand lever. Look for a bolt that is sticking out in a horizontal position.
approx 11 litres
Near the kick stand. The bolt is horizontal.
its a 17mm size bolt at bottom of engine
Counter clockwise