0
What else can I help you with?
What size vacuum hose for 36 ft pool?
For a 36-foot pool, a standard 1.5-inch diameter vacuum hose is typically recommended. This size provides adequate suction and flow for effective cleaning without causing excessive strain on the pool pump. Ensure that the hose is long enough to reach all areas of the pool, factoring in any additional length needed for maneuverability. Always check your specific vacuum cleaner’s manufacturer guidelines for the best fit.
How do you replace pool flex backwash hose?
To replace a pool flex backwash hose, first, turn off the pool pump and drain any remaining water from the hose. Disconnect the old hose from the backwash port and the waste outlet, using pliers if necessary to loosen any clamps. Measure the length needed for the new hose, cut it to size if required, and securely attach it to both ends using clamps. Finally, check for leaks before resuming normal operation of the pool system.
Above ground pools how to clean?
When you bought your pool it may have come with a vacuum if not any pool store (or Home Depot, Lowe's, Walmart) will have them you will need to know what size pool (for lenght of hose) and what size plumbing (normally 1 1/4 or 1 1/2 inch) for hose and vacuum size you will also need a universal handle. You should be able to get all the stuff you need for about $150 Good Luck
Can you connect a garden hose to a inground swimming pool pump?
You can probably find the plumbing to step down to the right size but the pool pump will have more water flow then a garden hose can safely handle. Your going to ruin either the pump or yourself.
What size chain fits the polaris predator 500?
The Polaris Predator 500 typically requires a 520 size chain. It is important to ensure that you also use the appropriate length and type of chain, which can vary based on modifications and wear. Always consult the owner's manual or a trusted mechanic for the specific length needed for your model.
What size is the motor in polaris w897527?
The Polaris W897527 features a 2.3 HP (horsepower) motor. This motor is designed for optimal performance in various Polaris pool cleaner models, ensuring efficient cleaning and operation. For specific applications or compatibility, it's always best to consult the manufacturer's specifications or user manual.
What is difference between tube connector and tube adapter fitting?
A tube connector is the standard fitting that goes on a tube or hose. A tube adapter fits to a tube or hose and enables it to connect to a fitting of a different size to its standard.
How long would it take to fill a 14 thousand gallon pool?
A day or 2 depending on the water pressure
How long does it take to empty a 18000 gallon pool using a 1.5 inch hose?
The time it takes to empty an 18,000-gallon pool using a 1.5-inch hose depends on the water flow rate, which typically averages around 10-15 gallons per minute for a hose of that size. At an average rate of 12 gallons per minute, it would take approximately 1,500 minutes, or about 25 hours, to completely empty the pool. However, factors such as hose length, elevation, and water pressure can affect this estimate.
What size is polaris?
The main star of the Polaris System has a mass which is 4.5 times that of the sun.
What is size of polaris?
The main star of the Polaris System has a mass which is 4.5 times that of the sun.
Can full size mattress fit a full size sleigh bed frame?
the answer is yes and no because the king only fits the king size. the quenn mattress size only fits the queen size fits and the small well it only fits the small.
