0
What else can I help you with?
What is the bolt size for a 97 Chevy cavalier starter?
The 1997 Chevy Cavalier starter bolt size is 9/16 by 3.5" inches long. You will need three starter bolts to secure the starter.
How much would it cost to replace a starter in a Chevy?
it depends on the year,model and size of engine
Where is the starter located on a full size 1988 Chevy truck?
Look at the lower rear end of engine
How can I properly use a seat post shim to adjust the size of my bike's seat post for a better fit?
To properly use a seat post shim to adjust the size of your bike's seat post for a better fit, you should first measure the diameter of your seat post and the diameter of your bike frame's seat tube. Then, choose a shim that fits snugly between the two sizes. Insert the shim into the seat tube and then insert the seat post into the shim. Make sure everything is securely in place before riding to ensure a comfortable and safe fit.
Where are the bolts located on a starter for a 87' Chevy Celebrity I know the one you can see on the top right but where are the others?
There are two bolts on the bottom side of the starter, they have 15mm head size.
How do you shim starter if tearing up ring gear?
Generaly you would pull the starter off and install them between the starter and the engine block. They come in several thickness so from there it is trial and error until you find the right size. And you need to be sure the ring gear is still ok. If not you could hit a dead spot and the started wont catch.
What size is drain plug on 1996 Chevy s10?
The wrench size should be 15mm.
Will a Chevy V8 fit in a 1990 Chevy V6 pickup?
in a full-size YES! you will need new motor mounts, fan shrouds, possibly starter and flywheel, radiator, either conversion to carb or a motor from a similar year 1500 and the computer but the harness should be the same.
What size transmission is in your 1984 Chevy truck?
It should be a 700R4
I called around to find prices on a starter for my Chevy cavalier Places asked me what the casing size on the starter was three and seven eighths etc How do I find this out?
Remove the starter and take it with you to the Auto Parts store of your choice. They can look at it and find a replacement.
What size is the drain plug for 99 Chevy s-10?
The wrench size should be 15mm.
Where is the camshaft sensor on a 2002 Chevy Suburban?
You didn't say what size engine you have. But I would have to say that it is a V-8 engine. The sensor will be bolted into the passenger side of the engine BEHIND the starter. You Will Have To REMOVE the starter.
