0
What else can I help you with?
How do you replace spark plugs on 2003 5.4 L ford?
Use a spark plug socket with extensions.
How do you replace spark plugs on a Ford sport track 2003?
Spark Plug size is standard and there is a socket you can get at the Hardware store. You will need a 3" extention and a 3/8" drive rachet.
What size Allen socket is needed to remove bolt from caliper on 2002 ford escape?
I have a 2003 Escape and it took a 7 mm socket.
How to Replace parking brake cable 2003 Ford Escape?
video on how to replace parking brake cable in ford escape 2003
How do you change sparkplugs on 2003 VW Polo?
Begin by removing the spark plug wire from the top of your 2003 VW spark plug. Remove the spark plug with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install your new spark plugs.
How do you replace the fog lights for a 2003 Chevy Tahoe?
Remove the socket from the rear of the fixture, remove faulty bulb from socket and replace with good bulb and replace socket in fixture. Fini!
How do you change spark plugs on 2003 Toyota Camry?
Remove the coil pack for the spark plug. With a deep socket or spark plug socket, remove the plug. Taking care to not cross thread or bend the plug tip, screw in the new plug to approximately 13 pounds of torque. Replace the coil pack. Repeat for each plug.
Replace spark plugs on 2003 Nissan pathfinder?
To replace the spark plugs on a 2003 Nissan Pathfinder, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coils by unscrewing them and pulling them out, then carefully extract the old spark plugs using a spark plug socket and ratchet. Install the new spark plugs by hand to avoid cross-threading, then torque them to the manufacturer's specifications. Finally, reattach the ignition coils and reconnect the battery terminal.
How do you replace spark plugs in a 2003 Pontiac Vibe?
First you remove the plastic engine cover on top of the valve cover. Then you remove the wires from each of the three coils, then you remove the bolt holding each coil and remove coil. Down in that hole is the spark plug, remove with socket and replace.
What size socket do you need to remove a spark plug from a 2003 KIA Rio?
To remove a spark plug from a 2003 KIA Rio, you will need a 16mm (or 5/8 inch) spark plug socket. It's important to use a socket with a rubber or magnetic insert to help grip the spark plug. Additionally, a ratchet and extension may be necessary to provide better leverage and access to the plugs.
How do you remove the spark plug plenum for a 2003 mitsubushi eclipse?
You can remove the spark plugs in your 2003 Mitsubishi Eclipse by turning the spark plugs to the left. You should use a 5/8 deep well socket. The spark plugs will come out.
What size socket is needed for axle nut on 2003 ford escape?
32mm
