u will need a 13 r 14 metric socket and also a open end wrench of the same size. because of bolts on other side of bracket. don't forget to remove heat shield, oxygen sensors and oil filter. make it very easy to remove. should take about 30 min. u also will need a 1" open end wrench to remove oxygen sensor
It is on the starter.
It is on the starter
The starter for a 2005 dodge stratus is mounted on the side of the engine. It is over the exhaust system.
Where is the cool fan relay on a dodge stratus and how do you replace it
How much should it cost to replace the airbags on a 1997 dodge stratus?
Behind the front motormount
To replace the starter in a 2002 Dodge Stratus 2.4L, first disconnect the negative battery terminal to ensure safety. Then, remove any components obstructing access to the starter, such as the air intake duct. Unbolt the starter from its mounting bracket, disconnect the electrical connections, and then remove the starter from the engine. Install the new starter by reversing the process, making sure to securely reconnect all electrical connections and reattach any removed components.
2 bolts
The starter bolts on a 1998 Dodge Dakota require a 5/8 inch socket or wrench.
I had to replace the engine in my 2001 stratus SE and it ran me 900 dollars.
There are a few things that it could be if you Dodge Stratus wont start on first try. It could be the starter.
== ==