0
What else can I help you with?
How can you change your 2000 Maxima tires with a wheel security device when you do not have the key?
HAMMER THE CLOSEST SIZE SOCKET YOU HAVE ONTO THE WHEEL LOCK THEN USE A RATCHET TO REMOVE IT
What size socket do you use to replace a wheel bearing on a 2006 cobalt?
you do not use a socket you use a wheel bearing puller to remove it from the hub Putting a right size socket into it and hitting it with a hammer can pop the bearing out, but it can also damage it so its advised to get the right tools. size 30 mm for the wheel nut and the bearing puller
What is the size of a kia sorento wheel nut socket?
The size of a Kia Sorento wheel nut socket typically depends on the model year, but most commonly, it requires a 21mm or 22mm socket for the lug nuts. It's always best to check the owner's manual or consult with a dealer for the specific size for your vehicle's model year. Additionally, some versions might use a different size, especially if equipped with a wheel lock.
What size socket to remove bolts on the rear wheel hub on a 1992 Saturn?
To remove the bolts on the rear wheel hub of a 1992 Saturn, you typically need a 13mm socket. However, it's always best to double-check with a repair manual or verify the size with a socket set, as variations can occur. Make sure to use a ratchet or breaker bar for better leverage when loosening the bolts.
What size is the front wheel hub nut for Skoda fabia?
36mm 12 pt, you require a thin walled socket to remove and replace them.
Socket size for central wheel hub on 206?
32mm
What size socket do you use on a rear wheel bearing nut for a 96 neon?
For a 1996 Dodge Neon, you typically use a 32mm socket to remove the rear wheel bearing nut. It's important to ensure that the socket fits snugly to avoid stripping the nut. Always double-check your specific vehicle model and any aftermarket modifications that might affect the size.
What tool do you use to take out battery?
The correct size socket and ratchet to remove the hold down. And the correct size socket to remove the battery cable clamp.
What size is nut to remove front hub on 95 Ford F 150 4 wheel drive?
The nut to remove the front hub on a 1995 Ford F-150 4-wheel drive is typically a 36mm socket. You may also encounter a 1-5/8 inch socket as an alternative size. Ensure to properly support the vehicle and follow safety precautions when performing this task.
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
How do you replace left front rotor 1992 F1504x4 cannot disassemble bearings to remove rotor?
to dissasemble wheel bearings you need a special socket after you remove 4x4 hub this special socket will only fit the front bearing nut .a different size is used on the rear
What size is the wheel hub nut on a 2000 Mercury Sable?
it is a 22m socket
