0
What else can I help you with?
What is 333882 casting number on gm cylinder head?
333882 is the identifying number for that head. If you combine with Block, Manifold and Exhaust castings, you will find out from which vehicle your engine came.
What size valves does gm cylinder head casting number 83417369?
The GM cylinder head casting number 83417369 is typically associated with the LS-series engines, specifically the LS3. This head features 2.165-inch intake valves and 1.590-inch exhaust valves. These dimensions contribute to the head's performance capabilities, particularly in applications focused on increased airflow and power.
What is a 330545 Chevy head casting?
1973 350 Corvette. 76cc chambers. 2.02`` intake valves 1.6`` exhaust valves.
What size valves are in cylinder head casting numbers 3873487?
1.94 intake and 1.50 exhaust
How do you find out the casting number on a Chevy 350?
THE BLOCK CASTING NUMBER IS BEHIND THE CYL. HEAD. SORRY CAN'T REMEMBER WHICH HEAD. IT USUALLY IS A RAISED SEVEN DIGIT NUMBER. THE CYL. HEAD CASTING NUMBER REQUIRES REMOVING THE VALVE COVER AND CHECKING THE RAISED CASTING NUMBER ON TOP OF THE HEAD. YOU CAN CALL A DEALER OR A ENGINE REBUILDING SHOP AND GIVE THEM THE NUMBERS. THEY SHOULD BE ABLE TO GIVE YOU THE YEARS THAT CORRESPON TO THE CASTING NUMBERS.
What sive valves are in a cylinder head cast number 2843908?
This casting number was used for the Dodge 318 and 440 engines. The casting # very often has nothing to do with valve size (Especially with Mopar) Dodge very often had a truck load of castings show up and be machined and installed on engines intended for very different uses.
What is the cc chamber on a Chevy head casting number 14022601?
58cc
What is the cc chambers on 471513 head casting number?
UNDER 55ccS
How do you find out what cast number your cylinder head on your 2000 jeep Cherokee is?
The casting number is 0331
Honda cylinder head numbers?
where can i find my casting number on cylinder head for 1993 Honda civic
Where are the casting number on a 350 Chevy cylinder head?
Remove the valve cover and you will see it stamped into the top of the head.
What year is a 454 cylinder head with a casting number 10114156?
The casting number 10114156 corresponds to a cylinder head that was produced by General Motors for the 454 cubic inch big block engine. This specific head was used primarily in the late 1970s to the early 1980s, specifically from 1976 to 1985. It is important to note that while the casting number indicates the head's design, the actual year of production may vary depending on the specific application.
