1 5/16 wrench. Just did one last week. Be prepared to fight the Pitman arm off of the steering box shaft. A pickle-fork bit and an air hammer make it a piece of cake. Some guys unbolt the steering box from the frame to wiggle the steering box into a position where they can get a Pitman arm puller on it. Either way you will need some pretty specialized tools.
1
15mm wrench
Chevy Tahoe remove front and rear speaker
How do you remove door speakers on a 1999 chevy tahoe
There are screws
How to remove steering wheel on a 2001 chevy tohoe
You need an approximately 3/8" Allen wrench. Preferably one that is driven by an impact driver.
15 millimeter
by hand :)
Yes, you can remove the back seat from a 1998 Chevy Tahoe 2-door. The process typically involves unbolting the seat from the floor using a socket wrench to remove the bolts securing it in place. Once the bolts are removed, you can lift the seat out of the vehicle. It's advisable to consult a service manual for specific instructions and safety precautions.
It is in the CARBURETOR where the fuel line hooks to it, Remove fuel line with 5/8 line wrench, Then take 1 inch wrench and remove the fitting in the carb. were the line was screewed into. There is a spring and filter in there, watch how you remove it and put it back the same way you took it out.
Chevy Tahoe Ignition Key Starter Switch