Check the fuses inside the driver's side kick panel (right side, against center console.) Turn the black screw, and then pull the panel directly off. Turn it around, and there is a diagram that will show which fuse is connected to what. Pull the fuse and make sure that it is not blown. (If it is blown the metal inside will not be connected.)
The one thing about Saturn's is if there is a problem with your car, then thousands of other people have the same problem. This problem is typical. I would bet it is the back up light switch if you drive a standard transmission. The back up light switch can be purchased for about $25.00 at an auto parts store. It plugs into your engine roughly below the battery. The battery may have to be removed to gain access to the plug, but its an easy fix. This only applies if you have a standard.
I removed the switch from the transaxel-with the front left wheel removed. Sometimes if you have some- electrical parts cleaner sprayed it the trans side of the switch can restore function to it. Had to do this because auto parts stores nearby did not stock this switch. works fine for now.In a 2003 Vauxhall Corsa, the fuse for the reverse lights is typically located in the fuse box inside the vehicle. This fuse box is usually found on the driver's side, beneath the dashboard. You can refer to the owner's manual for the exact fuse number and specifications. If the reverse lights are not working, checking this fuse is a good first step.
#14
You must pull off the plastic panel from the inside of the truck to access the lights.
check reverse light switch on transmission.
The reversing lights on your 2003 Vauxhall Corsa may not be working due to several potential issues. Common causes include a blown fuse, faulty reverse light switch, or burned-out bulbs. Additionally, wiring problems or poor connections could also be to blame. It's best to check these components systematically to identify the specific issue.
Hard starts and under powered may stall at stop lights.
2003 Saturn Ion clunking when breaking
To change the reverse lights on a 2003 Infiniti QX4, first, locate the tail light assembly on the rear of the vehicle. Open the rear hatch and remove the screws or clips securing the tail light assembly. Carefully pull the assembly out, disconnect the wiring harness, and twist the reverse light bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble the tail light, and test the lights to ensure they're functioning properly.
The driver's side door ajar sensor may not be working.
i am having the same problem with my galant.
One or both your break lights are no longer working.
The most likely reason why the interior lights of a vehicle are not working is because a fuse has blown. That is especially true if all of them are not working. Get out your owners manual. See where the fuse box is located. Find the particular fuse, and replace it.