ten mill plug socket and long extension bar on ratchet
with tools
You will need the correct replacement spark plugs, a spark plug socket, and a screw driver. The new cars have the spark plugs concealed and you might have to open the cover over the engine to access it, which may require addition tools
How do I change spark plugs in 2009 Toyota Corolla? whaT TOOLS I NEED
== ==
To change spark plugs in a Mercedes, start by gathering necessary tools such as a spark plug socket, ratchet, and torque wrench. Remove the engine cover if applicable, then disconnect the ignition coils by unfastening their connectors and bolts. Carefully extract the old spark plugs using the socket, and install the new plugs by hand to avoid cross-threading, then torque them to the manufacturer's specifications. Finally, reconnect the ignition coils and reattach the engine cover.
use a bendy extension with your plug socket on the end. Available in a good socket set such as Teng-Tools. Dan,
You didn't say which engine you had, but with most of those GM's you had to roate the engine to get to the rear plugs. Lisle tool company sells an engine rotation tool. You disconnect the engine stuts that attach to the radiator support and install the turning tool in its place. You put the car in neutral and tighten the tool. That rotates the engine forward enough to get your hands back there to replace the plugs. If you want to play with cars, you have to own the tools.
no special tools required except a plug wrench most socket sets have plug sized sockets in them
On a 2002 Land Rover Freelander, the spark plugs are located beneath the engine cover, accessible from the top of the engine. You will need to remove the engine cover and the ignition coil pack to reach the spark plugs, which are situated in the cylinder head. It's advisable to use the correct tools and follow the manufacturer's specifications when servicing the spark plugs.
In a 1996 Honda Passport, the spark plugs are located on the engine cylinder heads. To access them, you typically need to remove the engine cover and any components obstructing the spark plug wires. There are usually six spark plugs, as the Passport is equipped with a V6 engine. Make sure to use the appropriate tools and follow safety precautions when working on the engine.
On a 2003 Jeep Liberty, the spark plugs are located in the engine cylinder head. For the 3.7L V6 engine, you'll find the spark plugs on each side of the engine, accessible from the top. You may need to remove any plastic engine covers to reach them easily. Make sure to use the appropriate tools and follow the manufacturer's guidelines for replacement.
i cant figure it out either. . . .. . . .the world may never know