A-108 transmission.
any 4 speed tranny from a 340 engine will bolt to a 273, 318, or 360 engine as they are all the same engine block.
In a 1973 Dodge Coronet , the 318 was set at ( TDC ) with the automatic transmission ( a 1973 manual transmission equipped 318 was set at 2 and 1/2 degrees BTDC )
$3,100 to $3,300
yes it will but you will have to buy motor plates to mount it in the car as the 318 motor mounts won't work.
go to the library and get a chiltons repair manual for you year dodge.
you can bolt the engine in place with motor plates and then you will probably need to make a new cross member for the 727 transmission to mount and of course you will have to have a new drive shaft made.
due to the tightness in the engine bay inner fender well must be ground before installation
yes it has hydraulic lifters.
it was blue in color.
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few.
either change the K-frame or use engine plates to bolt the engine in.
A dayna-glyde 600 is what I have pushing my 318