0
What else can I help you with?
What differential fluid does a 1994 ford ranger take?
Use hypoid gear lubricant SAE 80W90.
What is the stock gear ratio on a 1998 ford ranger?
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
My 1990 ford ranger will not shift into gear?
A 1990 Ford Ranger may not shift into gear if the clutch is out. A clutch can be purchased at any auto parts store.
How do you replace the power steering gear box seals in a 1990 4.0L Ford Ranger?
how to remove a power steering gear box for a 1990 ford ranger 2.9
How do you fix a power steering fluid leak between the Pitman arm and steering gear on a 1994 Ford Ranger?
either rebuild or replace gearbox.
Why is your 99 Ford Ranger grinding when you put it into gear?
There are several things that can cause your 1999 Ford Ranger to grind when you put it into gear. The most common cause is a lack of transmission fluid.
How do you remove Ford Ranger gear knob?
The gear shift knob on a ford Ranger is pressed on tightly. A heat gun or hair dryer can be used to heat the knob to help remove it.
What gear oil for a 92 Ford Ranger Manual Transmission?
It is important to have the right fluid in a car to help it run smoothly. For a 1992 Ford Ranger with a Manual Transmission the best gear oil is Mercon V.
Why does reverse jump out of gear in ford ranger?
i have a ford focus 1.8 petrol S reg. When i put it into reverse gear it jumps out what is the problem please ?
What is the rear end gear ratio of a 1999 Ford Ranger with axle code 86?
I ASSUME axle code " 86 " is the same as it is on the ( 1996 ) Ford Ranger ( 3.73 gear ratio , conventional / non - limited slip )
How do you replace a steering gear box seal on a 1994 ford ranger?
To replace the steering gear box seal on a 1994 Ford Ranger, first, safely lift the vehicle and remove the front wheels for easier access. Drain the power steering fluid and disconnect the steering linkage and power steering lines from the gear box. Remove the gear box from its mounting, replace the worn seal with a new one, and reassemble everything by reversing the disassembly steps. Finally, refill the power steering fluid and check for leaks before taking the vehicle for a test drive.
What transmission fluid should you use in a 1994 Ford Ranger manual 4-cylinder?
MERCON . Simply stated, There is no substitute. 80W-90 Gear oil because mecron is to thin
