answersLogoWhite

0

You would hook to the negative side of the coil. Some HEI distributor caps are marked "tach".

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where do you hook up the tach wire on the coil of your 92 thunderbid 302 engein?

Hook it to the negative side of the coil.


How to connect the tach to the coil on a 87 El Camino?

Since the coil is in the distributor, simply hook the tach 'trigger' wire to the out put on the side of the distributor cap marked 'tach'.


How do you install a Sunpro super tach 2 tachometer in a 1994 Silverado?

hook your green wire from the tach to the white wire from the coil PAC it should be a white and a yellow wire coming from the coil. the tach should have a white wire that will be your light inside the tach a red wire for power and a black for ground.. good luck


Where do you hook up the tach wire on 1973 nova?

Negative side of the coil. David G,


How do you hook up a hei distributor with external coil to a tachometer?

The green wire from the tach goes to the negative side of the coil.


How2 hook up sun super tach 2 to a 88 k5 blazer?

u have to look at ur distributor if it is an HEI "coil on top there is markings on the distributor cap for the tach but if it is a regular distributor with an external coil you hook it up to the neg wire off the coil neg/ black wire


How do you hook up pro tach rpm gauge on a 1982 ford F-150 pickup?

Hook up the red wire to the fuse box or another wire that gives power when the key is on. Hook up the white wire to a wire coming out of the headlight switch. This will make is so that when you turn your headlights on, the light will come on on the tach. If you don't mind the light on the tach being on all the time then just hook it to another power wire. Hook the black wire to a ground like a screw or a bolt. The green wire is the signal wire. Run it through your fire wall. Hook it up to the negative side of the coil. There will be a negative sign on the coil denoting the correct side.


Which white wire do I hook the green tach wire to since there are two white wires going to the coil on my 90 Chevy 350?

one white wire goes to the distributor, the other goes nowhere. This is the lead that goes to the tach


How do you install a tach on an '82 Chevrolet 305?

Its EASY! just connect the (usually green) wire to the negative post on the coil. Hook up the power wires and the illumination wire and ground for the tach wire and ur done its easy!


Does anybody know with a 96 s10 pickup that has no tach from the factory can you install a cluster that has a tach Will the connection be there for a tach if originally it did not have one?

theirs a green wire by distributer that is for the tach


How do you install a tachometer in a 1991 Honda Civic and which wire is the coil wire coming out of the distributer?

its the blue wire, alot of ppl run it off the distributor, but why, when these cars came with a tach in the Si trim, just splice into the blue wire on the gauge cluster harness


If you are trying to hook up a tach to your '90 Bonneville which wire should you hook it up to to get an rpm reading?

to hook up the tach use the hot lead on the disributor and to any good ground wire and if there is a light hook it to the wire on you light switch