answersLogoWhite

0

The bore diameter would be 4.195 and the stroke is 4.218.

using the formula pi times the radius squared:

4.195/2=2.0975*2.0975=4.3995*3.14159*8*4.218=466.4

So, a 455 bored 40 over would be a 467

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is a Chevy 305 engine bored 040 over called?

A Chevy 305 engine bored .040 over would typically be referred to as having a +.040 bore, indicating the increase in bore diameter from the standard size. This modification can increase the engine's displacement and potentially enhance its performance.


Is a 355 engine a 350 bored out?

Yes. That would be a 350 bored .030" oversize.


Would a 1992 Pontiac Grand Am engine and transmission fit a 1993 Pontiac Grand Am?

Yes It would if its 2.3L engine size. Also, fits Oldsmobile Achieva of same year. Thanks


What is the best engine a 355 Chevy or a 383 Chevy?

355 is a non stroked just bored 4.030 over 383 on the other hand put a 3.75 stroker crank and bored honed so i would pick 383 . 355 is bored not stroked clearence for stroker crankbest engine would say is 383


Which car was better the Chevrolet Nova coupe of the year 1972 or the Pontiac Le Mans coupe of the year 1972?

The Pontiac LeMans would be my choice. It is slightly larger and more luxurious. The Pontiac engine was also a better engine than the Chevy.


Why would the engine miss on acceleration on a 91 Pontiac lemans?

because of transmission failure


Would a Dodge Charger bet a Pontiac GTO?

That depends on the year, engine size...


Why would a 1996 grand am engine stall?

does my 1996 pontiac ga stall out in park


Did your 1973 fire bird come the factory with 350 Oldsmobile engine?

I would bet no, it did not. The 1973 Oldsmobile engine was painted gold and the Pontiac engine was not.


How do you rebuild a 305 engine into a 350?

The cylinders would need to be bored to 4", which would probably make the walls too thin.


Would a 3400 engine from a 1999 Pontiac Montana fit in a 1996 Pontiac transport that has a 3.4 L engine in it now?

if the vin codes match then they should but i'd look at the wiring diagrams to be sure...


What is a 030 over 350 engine?

That would be an engine whose cylinders have been bored .030" oversize and fitted with new oversize pistons. New displacement would be 355 ci.

Trending Questions
How do you unlock a 1999 grand marquis gs car door? How do you know when you need to replace the computer on a 1995 Cadillac DeVille? How many gallons does a 2004 Ford Explorer have? What is the Front and rear ride height for 1973 roadrunner big block b body measured from where? How do you recharge 134a A.C. on 1997 F150? Will a 700r4 transmission out of a 1988 C1500 work in a 1995 gm c1500? The speedometer works fine on my 1992 Chrysler New Yorker but why did the odometer stop working? How much freon goes into 1994 ss impala ac system? How do you fix your Honda Odyssey passenger side sliding door after being in snowy and freezing conditions it will not open automatically doesn't even make a sound and fuses are fine? What is diagnostic code 14 on a 1996 jeep grand Cherokee? Diagram Disassemble Crank Sensor 91 Pontiac Bonneville? What is the top speed of a Chrysler 300m special edition? How many pounds of freon add to 1996 dodge grand caravan dual air? How do you fix a belt tension on a 1999 Lincoln town car? Where is the intake air temperature sensor on a 2011 dodge charger 3.6L v6? How do you change the battery in your Oldsmobile regency? In this section you will be shown 8 dts screenshots. click on the portion of the screen shot where yu perform the stated action or where you could located the requested information. if you select the? Where is the thermostat on a 2001 Dodge Caravan 3.3 L? How many cars were produced in 1929? How do you fix a P0302 on a 98 Ford Expedition?