thae catalitic converter is pluuged
starter part were the wires are.
It depends. If it is a loud clicking sound you will want to take it to a professional Immediatly! Without Delay!
A bad resistor can cause your BCM to make a clicking sound. The clicking noise can be caused by the relays and replacing the BCM will fix the problem.
The clicking may be the belt tensioner clicking. I know that mine is causeing a clicking noise. If you get a friend to help you, you will be able to see it happen if that is the case.
probably have a bad relay, that was my problem.. Are your turn signals not working, but your hazards lights are? and if so, do you hear a constant clicking sound, like your turn signal is turned on? Does the clicking sound go away when you hit the brakes? It is the relay.
When you drive over a clicking bettle.
Lifters ticking.
the clicking sound is the blinker. when you signal to turn with your blinker the light flashes and makes a clicking sound.
My 2003 Chevrolet Suburban 280 hp engine is making metal clicking sounds when I accelerate. It gets worse the faster I go. The battery went dead and had to be jumped two days ago. The car starts fine but then it makes this clicking sound when I put it in drive and go. It happens in park also. What is this?
Detonation...Needs to be fixed immediately or will eventually destroy engine.
It sounds like the starter relay is the clicking sound. Check to see if power is leaving the relay when the switch is turned to starting mode.
The A has a long A sound, and the -er is a schwa (unstressed er/ur sound).