those had a problem with a vehicle speed sensor but your throttle position sensor can do it too
A transmission shift lock prevents someone from shifting out of park unless the brake pedal is depressed.
A transmission shift lock prevents someone from shifting out of park unless the brake pedal is depressed.
my drive and 3rd not working what is causing this promblem is their a a promblem with the transmission
This more than likely your transmission starting to slip. You should take it to a reliable mechanic to fix this.
it's very normal to hesitate in such situation you were in. we hesitate unless it's proven.
Nothing unless the atoms form a target. A PARTICLE accelerator accelerates PARTICLES not atoms.
You add fluid at the same place you check it. If there is no place the check the fluid level it is a sealed transmission. It can be checked but I hesitate to post the procedure here. Do it incorrectly and you can damage the transmission. Unless you see an obvious leak, then just have it serviced as outlined in your owner's manual.
In the context of driving, shifting without a clutch refers to changing gears in a manual transmission vehicle without using the clutch pedal. This technique is known as "clutchless shifting" and requires precise timing and coordination to match the engine speed with the transmission speed for a smooth gear change. While it can be done in certain situations, it can cause excessive wear on the transmission components if not executed properly. It is generally not recommended for everyday driving and can lead to costly repairs if done incorrectly.
Not really unless your doing it at 20 mph. It is somewhat hard on the U-joints, however.
Throttle position sensor
Transmission cable that runs to your transmission is either broken or the link has came apart. Replace the cable and/or transmission and make sure if you have an automatic, to press down on the brake pedal before shifting out of park, most cars from 1960- 2010 have a lock-out feature so you cannot shift in or out of the Park position unless you are pressing the brake pedal.
You can't adjust the gas pedal. Unless you cut and weld the arm of it.