Start with the most likely andeasiest to fix. Check your brake pads... There is a wear indicator on the inside pads (closest to engine) that will rub on the rotor and make a squealing noise to warn you that the pads are getting thin. When you apply the brakes the noise will go away a lot of the time. If the pads are new or not making the noise then I do not know what the problem may be.
a belt needs changed. go to see a mechanic
Change the brake pads. I have had good luck with PBR Deluxe and PBR Metalmaster. They are quieter and dust a lot less.
The squealing sound in brakes is caused by dust and dirt in the brakes. Also, more commonly, it is caused by worn pads or shoes. On disk brakes there is a wear indicator. This will rub against the disk and squeel when brake pads are worn to where they need replacing.
A 1996 camaro has the same DISK brakes as a 2001. It does not have drum brakes.
Have the brakes checked.
When the brake pads are worn the rivets will actually touch the brake rotor when the brakes are applied. The brakes should be changed immediately.
Depends on the kind of pads/rotors you got. It's normal for some compounds to squeak .
"Squealing" is usually from the belt or brakes. use belt conditioner to stop a squealing belt.(usually sold at walmart) you can probably figure out how to stop squealing brakes. but if not they need to be replaced. people need to start reading those owners manuals the car comes with.
if they are drum brakes it could be that the drums friction surface has a defect on it and everytime the shoes hit it it pops or it could be a bad hold down or quieter spring in the drum itself
check your wheel bearings
Brakes most likely
Bike disc brakes can squeal when pressure is applied due to vibrations caused by the brake pads rubbing against the rotor. This can happen if the pads are contaminated, misaligned, or worn out. Regular maintenance and proper alignment can help reduce squealing.