A loose belt is the most likely culprit, when you press on the gas all of a sudden the engine will respond quickly but a belt driven component like the alternator will give resistance thus causing the squeal.
A bad throw out bearing will make noise when the clutch pedal is pushed down.
Start by checking the fuel pressure.
Does the noise happen all the time you push on the gas pedal or only at certain speeds?
Breaks will often squeak when they are wet, such as after a heavy rain, on a humid day, or on a foggy morning. The water prevents the pads from properly grabbing the rotors. This causes the squealing noise.
When the turbo winds up it can make a whistling sound when a driver steps on the pedal. A loose part can also cause a rattling sound when the pedal is used.
A vibrating brake pedal is an indication of a warped rotor. Noise is common to disk brakes but depending on the noise it can mean that the brake pads are worn out and you are due for a brake job.
could be the throw out bearing
It will be noisy, squeaking or squealing coming from the trans, and you may feel roughness or vibration through the clutch pedal when holding it in, it may also give you a little extra resistance when pushed.
Your bike may make noise when you pedal due to issues such as loose components, misaligned parts, or worn-out bearings. These problems can cause friction and vibrations, resulting in the noise you hear while pedaling. Regular maintenance and proper adjustments can help reduce or eliminate these noises.
The pedal in the car you push to go faster is the accelerator pedal.
A noise reducer pedal helps to reduce unwanted background noise and hum in a guitar setup, resulting in a cleaner and clearer sound.
Do you mean when you push the pedal " hard " you hear noise..........if so could be the ABS..........if not, then please have your brakes checked for safety.