answersLogoWhite

0

on the front right caliper follow your line up to where it attaches to the strut there will be a metal hanger there that holds the line to the strut alot of time moisture collects here and clogs the line try bending the crimp and loosen the line so it is free the crimp the line with pliers to open back up if this doesnt work the line could be collapsed inside and you cant tell from the out and youll need a new brake hose hope this helps

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is wrong if the pedal is almost fully depressed before it starts to stop a 1992 Prelude if the master cylinder is OK calipers bled front calipers replaced and there is no leaks or air in the line?

check linkage down near the pedals..there might be some excess play that is causing the problem


What are the precautions to be observed while using vernier calipers?

When using vernier calipers, ensure that the instrument is clean and free from dust or debris to avoid measurement inaccuracies. Always take measurements at eye level to prevent parallax errors, and ensure that the caliper jaws are properly aligned with the object being measured. Additionally, handle the calipers gently to prevent damage to the jaws and the scale, and make sure to zero the caliper before use to confirm accuracy.


How long does a kegerator typically last before needing to be replaced or repaired?

A kegerator typically lasts around 5-8 years before needing repairs or replacement. Regular maintenance can help extend its lifespan.


How long does a road bike typically last before needing to be replaced or repaired?

A road bike typically lasts around 5-10 years before needing significant repairs or replacement, depending on usage and maintenance.


Replaced timing belt and all idlers and tensioner now has a miss and rough idle car was fine before this Whats up?

Chances are the Timing gears or pulleys are not properly aligned. The Cam shaft and the Crank shaft must be aligned properly so that the valves and pistons are "in sync"


What four things should be checked before placing the computer in the abs?

The 4 main things that need to be checked and or replaced before replacing the computer with an ABS system are the pads, the rotors, the calipers, and the shocks. Also make sure to look over the brakes as well before putting in the ABS system.


How long do bicycles typically last before needing to be replaced or repaired?

Bicycles typically last for about 5-10 years before needing significant repairs or replacement, depending on usage and maintenance. Regular maintenance can extend the lifespan of a bicycle.


How long does a bike typically last before needing to be replaced or repaired?

The lifespan of a bike can vary depending on usage and maintenance, but on average, a well-maintained bike can last anywhere from 5 to 10 years before needing significant repairs or replacement.


1998 gmc sierra 4x4 and am having a hard time stopping it you replaced the calipers and pads and bled the lines you still have very little brake and the pedal travels a long distance before slo?

Could be the master cylinder is NG. Be sure to bench bleed the new master properly before you install it.


How long do road bikes typically last before needing to be replaced or repaired?

Road bikes typically last around 5-10 years before needing significant repairs or replacement, depending on usage and maintenance. Regular maintenance can extend the lifespan of a road bike.


How can I fix the brakes on my bike?

To fix the brakes on your bike, first, check if the brake pads are worn out and need replacing. Next, adjust the brake cable tension if the brakes feel loose. Make sure the brake calipers are centered and aligned properly. Finally, test the brakes to ensure they are working effectively before riding your bike.


How to fix the rear brakes on a bike?

To fix the rear brakes on a bike, first, check the brake pads for wear and replace if necessary. Next, adjust the brake cable tension to ensure proper braking. Make sure the brake calipers are aligned and centered on the wheel. Test the brakes to ensure they are working correctly before riding.