answersLogoWhite

0

flasher module in the fuse box. tin can about the size of a silver dollar around. it pulls out. some fords have a second one on the back side of the fuse panel opposite the first one.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

What would cause turn signals not to work in Lincoln navigator hazards work fuse not blown.?

Turn signal flasher module?


How do you fix the turn signals on the early version 2001 Passat?

If the turn signals are inoperative check the hazard switch, if the hazards don't work replace the hazard switch, the signals will start working. if the hazards are ok ,the turn signal switch may be bad.


1990 ford ranger and the hazards work but the turn signals don't. All bulbs are working. Any ideas?

Turn signal flasher


How would you fix turn signals on a 1994 Geo Prizm when the fuse and turn signal relay have been ruled out as the problem Neither signal nor hazards are working?

I would suspect the signal switch is at fault.


2000 Lincoln ls turn signal don't work?

If your 2000 Lincoln has turn signals that don't work, first check to see if the bulbs are working. Then, see if there is fuse that has blown that affects the turn signals.


Why do hazards work but turn signals don't?

For most vehicles the hazards and signals are two separate circuits, they have separate fuses and separate flashers. Check your signal light fuse and signal light flasher.


Just replaced multifunction switch in 1998 Lincoln navigator because turn signals were not working Turn signal still not working What is the problem?

Did you happen to check the turn signal flasher before you installed the switch?


What besides fuses could be the reason your turn signals do not work on 94 Ford Explorer XLT and is there a signal timer My hazards and wipers are working?

You could have a lose wire in the stering column.


Why doesnt my turn signal not working on a navigator?

I CANT GET MY TURN SIGNAL OR 4WAY FLASHERS TO WORK ,FUELS ARE GOOD. I HAVE A 98 LINCOLN NAVIGATOR CANT GET THE TURN SIGNALS OR 4WAY FLASHERS TO WORK. FULSE OR GOOD


Why won't my turn signals come on at all on my 1993 Cadillac Allante but my hazards still work?

Turn signals and hazards are two separate curuits. Check/replace your signal light fuse and flasher.


My hazards work but turn signals dont in a 1987 acura integra checked the fuses and the relay but still not working?

It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.


Turn signals wont flash but hazards do?

replace turn signal flasher, hazard flasher is separate