answersLogoWhite

0

a bad battery will do this. also make sure the correct shims are used in installation and that the number of teeth on flywheel and starter both match. either of these can make starter hangup and not disengage

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where is the starter solenoid on a 1991 Chrysler new yorker?

on the starter


How do you replace solenoid on 1991 Ford Escort?

The solenoid is part of the starter.


Where is the solenoid on a 1991 camaro z28?

mounted on top of the starter.


On a 1991 Ford Escort Gt Where is the Solenoid Located and is there a diagram for that?

Starter solenoid is attached to the top of the starter, the starter can be removed and taken to a parts store that has a machine which can check both solenoid and starter, in my area autozone does this free of charge


Where is the solenoid on a 1991 Nissan Sentra?

It rides piggy-back on the starter.


How do you change the solenoid on the starter for a 1991 Volvo 740?

you have to take the starter out of the car and dismantle it.....it's an integral unit


On a 1991 caprice classic what would cause no power from the ignition to the starter solenoid?

check g/box inhibitor switch could be out of adjustment


Where is the starter relay switch located on a 1991 dodge van?

Maybe on the top of the starter - follow the + battery cable it will connect to the starter relay (solenoid)


Where is the starter solenoid located on a 1991 Chevy Caprice?

Pull your starter down, the cylinder on top of the starter that the main 12v cable is bolted to is what you are looking for. jr


Where is starter solenoid on 1991 buick regal 3.8 engine?

between the transmission and the transmission housing


Where is the starter solenoid on a 1991 Ford Explorer?

It is located on the passenger side fender firewall behind the battery.


Where do you put the ground wire from the starter on a 1991 s-10 blazer 4.3?

There is no ground wire from the starter. You should have one large wire from the positive battery post that connects to the large stud on the starter solenoid and one small wire that attaches to the small stud on the starter solenoid.