0
If an engine has:
* compression * fuel * ignition spark
delivered in the right quantities and at the right time while the engine is being "cranked" by the starter motor, it will start. Your problem now is to find out which isn't working right.
I always suggest starting fluid to help isolate the problem
What else can I help you with?
1993 Chevy suburban cranks but will not start getting fuel but no spark why not?
I would replace the ignetion module that is in the distributor.
What would cause your 1993 Jeep grand Cherokee Limited 4.0L inline 6 to not start?
on the 4.0 jeep, if it cranks, but wont start, try replacing the crank sensor, located at the top rear of the engine, at the transmission
1993 Grand Am engine cranks but does not start No spark No power to instrument panel gauges when key is in the on position?
ignition starter switch
What would cause a 1993 E350 EFI that is running great then dies and then not crank over and fire up Fuel or electrical Almost like if the coil wire was off just cranks and cranks and cranks?
It is the ECC relay! It is the ECC relay!
What could be the cause hard to start 1993 Toyota Camry 4cylnder when engine cranks but often will not start?
Its old, google how to clean (ICV) idle control valve.
1993 f150 cranks no spark fuel pump starter coil ok?
Would be in the distributer or the ignition module
I have a 1993 Toyota Corolla dx that cranks but won't start.?
I have the same exact car, with the same problem. Thinking it's the Fuel Filter and will be changing it ,or having it changed, soon.
Your 1993 Ford Ranger died while you were driving it and won't start back up Any idea?
if it still cranks then it might be that your timing belt broke and needs to be replaced, that just happened to me on my 94'
Why after your 1993 Gmc suburban 4x4 cranks up fine then cuts off after warm up?
jgjdj
Was driving your 1993 dodge shadow and turned into the parking lot it died it cranks and just had the oil changed 2 weeks ago but it will not start?
its most likely the timing belt its most likely the timing belt
1993 Mitsubishi Diamante cranks but will not start what should I check?
If your 1993 Mitsubishi Diamante cranks but won't start, first check the fuel system by ensuring there is fuel in the tank and that the fuel pump is functioning properly. Next, inspect the ignition system, including spark plugs, wires, and the ignition coil, to rule out spark issues. Additionally, verify that the battery is fully charged and that all connections are clean and secure. Finally, consider checking for any trouble codes with an OBD scanner, as this may provide insights into potential issues.
1993 GMC pickup 4.3 liter v6 It will not start It cranks but will not fire you have no spark at the coil you plan to replace the coil and Ignition module?
You might try a crankshaft position sensor first. Its probably cheaper than an ignition module.
