The fuel pump does not normally have to be "reset". If the vehicle is in a crash that causes the inertia switch to trip, the switch will have to be reset before the fuel pump will run.
In the drivers footwell , behind the kick panel . There is an opening in the kick panel to access the red reset button on top of the switch
The filter is located behind the RH side of the carbon canister under the hood.
At the top of the driver's side kick panel.
20 gallons. http://consumerguideauto.howstuffworks.com/2001-mercury-villager-3.htm a simple Google search yields amazing results!
At the top of the drivers side kick panel.
At the top of the driver's side kick panel.
It's at the top of the driver's side kick panel.
The fuel pump is mounted on top and inside the fuel tank.
The fuel pump reset switch is on the driver's side kick panel.
If you mean the reset button on top of the FUEL PUMP SHUT OFF SWITCH the switch is located in the drivers footwell , behind the kick panel , by your left foot ( there is an access hole ) on a 2000 Mercury Villager
Under the vehicle, approximately in the middle, driver's side.
There is no reset for the fuel gauge. The sending unit in the fuel tank has probably failed.