answersLogoWhite

0

When it gives you trouble otherwise, leave it alone.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

97 Chevy blazer with a cylinder 5 missfire i have replaced cap rotor wires and plugs can this be a bad spider injector?

Very possible.


Does a 1996 Chevy Blazer have a fuel pressure regulator?

Yes. It is not visable. It is under the upper intake manifold, attached to the bank of injector poppets (aka the spider).


How do you replace fuel injection spider 1994 Chevy Blazer and show a diagram?

To replace the fuel injection spider on a 1994 Chevy Blazer, first, disconnect the negative battery cable and relieve the fuel pressure by removing the fuel pump fuse and running the engine until it stalls. Then, remove the intake manifold, disconnect the fuel lines, and take out the old fuel injector spider assembly. Install the new assembly, reattach the fuel lines, and reassemble the intake manifold before reconnecting the battery and testing the system. For a detailed diagram, refer to a repair manual or online resources specific to the 1994 Chevy Blazer.


Where is the fuel injector on 2003 Chevy trail blazer 4.2?


Replace heater core in 1997 Chevy blazer?

how to replace a heater core in a 1997 Chevy blazer


Where is the Fuel Pressure Regulator on a 1996 Chevy Blazer V 6?

It would be found under the upper intake manifold, attached to the bank of injector poppets aka "the spider".


Where is the spider injector on a 95 Chevy blazer?

If you have CFI (Central Fuel Injection) the "spider" would be found under the upper intake manifold. The upper intake manifold has to be removed to gain access. If you have TBI (Throttle Body Injection) it doesn't have a "spider".


What is a spider in a Chevy S-10 blazer?

name of a differential gear. Also, engines with CPI (Central Port Injection), the bank of fuel injector poppets that are under the upper intake manifold are commonly called the "spider".


Where are the fuel injectors on a 1996 Chevy S10 blazer?

Under the upper intake manifold. The upper intake manifold would have to be removed to gain access to the bank of injector poppets (the spider).


1998 Chevy Blazer no fuel going to the carb from the injector but is going to the injector from fuel pump?

This is confusing, a 1998 does not have a carb.


Where is the fuel pressure regulator located on a 2003 Chevy S10 Blazer 4.3L?

It would be found under the upper intake manifold. It is attached to the bank of fuel injector poppets aka the "spider".


How do you replace the front driver side seat belt on a 2000 Chevy Blazer?

how do you replace seatbelt retractor on a 2000 chevy blazer