0
The manufacturer recommends flushing the radiator every 30,000 miles. The radiator should be flushed once every two years regardless of the miles.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Radiator Flush?
form_title=Radiator Flush form_header=Keep your car's system clean! If you need a radiator flush, we will help you find the auto service you need. What is the year, make and model of your vehicle?=_ Is this the first time you've had your radiator flushed?= () Yes () No () Not Sure Did you ever have the radiator replaced on this car?= () Yes () No () Not Sure Have you noticed any problems with your radiator?=_
What happens if you don't flush car radiator?
If the rust and metal that builds up in your radiator isn't flushed properly then after time it will clog up your heater core. That's a pretty pricey fix by the way.
Can muriatic acid be used to clean out a car radiator?
i used to work in a radiator shop back in the day and we put a radiator on a rotating machine and put muric acid in it and let it rotate for some time, then flushed it out and the radiator was totally clean, no more rodding. they were copper then. not sure about todays alum radiators
What horror movie marked the first time a toilet was not shown but also flushed on the big screen?
Pyseco
When should the radiator be flushed on a 2003 kia sorento3?
i am not a fan of "flushing " out radiators, drain and refill with new antifreeze,yes,ok but do not "flush". The reason is at time of Mfg of the radiator ,they put in stop leak from factory to fill up little micro holes in the mfg. process.So... if you do a " flush " guess what ,you remove all the stop leak from the radiator and you guessed it ! it starts leaking, Hmm i wonder why ? just drain and refill with a good brand at the right mixture. I get more cars come to me from jiffy lube needing new radiators because they where talked into having it " flushed " included with an oil change special. enough said.
How long should it take to change the radiator in a 1996 Toyota Tacoma?
about 45 mins to an hour from someone who knows what there doing... an hour to an hour and a half if its your first time.... 1996 Toyota tacoma is my first vehicle, im 20 and I changed the radiator by myself and it took me an hour.....
How do you fix a radiator leak on a 1994 Mazda Protege 4-cylinder automatic?
If this radiator has a plastic top, I would suggest you purchase a new radiator. If it is metal, then remove the radiator and have it repaired and flushed, at a radiator shop. This is a good time to service your cooling system. Replace the thermostat and flush the engine out. Check all radiator hoses including the heater hoses, and replace if necessary. Reinstall a 50/50 mix of the appropriate coolant. Don't forget to bleed the air out of the system after reinstalling everything.
What time of the year should you add the antifreeze to a car radiator?
Whenever it needs it.
Should as 2011 Chevy Cruz radiator cooling fan be on all the time?
No
Transmission fluid mixed with water in radiator in a 2001 Chevy S10?
Not a good situation. Don't drive it! The transmission cooler that is built in to the radiator is bad. The radiator needs to be replaced and the cooling system and transmission needs to be flushed completely. If any coolant is mixed with the transmission fluid it will destroy the transmission in a very short time. I repeat, don't drive it, have it towed to your local garage for repair.
How do drain antifreeze from 2000 olds silhouette?
First, start when the engine is cool. The radiator does not have a drain plug. What you do is loosen one of the radiator hoses. Take a garden hose and start putting the water directly into the radiator and turn the van on. Let the water flow throughout the radiator and the motor. Turn on your heater to get the heater components opened and flushed out also. Run the water throughout the radiator for a few minutes. Turn the van off. Turn off the heater. Repeat this step until the water runs clear out of the hose hole that was taken off in the beginning. Next, after you have flushed it twice, connect the hose that you took off. Turn the van on and start adding radiator fluid into the radiator. Don't overfill the radiator. While the van is running, the radiator fluid is being cycled throughout the engine. Watch the level of the radiator fluid and if it goes down, add more fluid. You will repeat this step several times because of all the radiator fluid cycling throughout the motor. You might have a little bit of fluid left, put this into the radiator fluid over flow container on the right side of the motor. Once you have added all of the radiator fluid, keep the van running for about 10 minutes and during this time, turn the heater on. If you find out that the heater is blowing cold air, after the 10 minutes, turn the van off, let it stand for about 5 minutes and turn it back on. The heater should be working now. The van just has to reset everything.
How do you flush out the coolant in a 2004 Saturn Ion?
The drain petcock is on the bottom left hand of the radiator(left if your looking directly in the engine compartment, right if your seating in the drivers seat). Its right above the bracket that holds the radiator in the bottom mount. Undo the petcock and then take off the reservoir cap. Once it's flushed, refill the reservoir with water (after you closed the petcock) run the engine for about 10 mins and then flushed again. Once flushed for the second time, refill with dexcool coolant and then your good. If someone can also point out to me where is the exact location of the reserve coolant so I can fully drain the coolant in the engine. Thanks!
