0
What else can I help you with?
How do you reset the backup reverse alarm switch on 2002 explorer limited?
There is a switch for the reverse sensing system located on the dash just to the right of the instrument panel dimmer control. When the ignition is on and the gear selector is in reverse, this switch can be used to disable or enable the RSS . If the system has been disabled the off indicator remains illuminated, so press the switch again when the ignition is on, and the gear selector is in reverse to return the system to the ON position.
Why isn't my car not going into reverse?
There is probably a problem with your selector i had the same problem on my 5 speed boxs the other day change the clutch and the reverse light switch but for got to put the washer on the switch so it whent in to far and caused the reverse link not to go in
How you switch from 2wd to 4wd low in 2000 ford ranger?
With the engine running , and the vehicle stopped with your foot on the brake pedal shift the transmission to NEUTRAL and then rotate your selector switch to 4X4 low then put in drive / reverse ( to switch back from 4X4 low to 2 wheel drive , with the engine running , and the vehicle stopped with your foot on the brake pedal , shift to NEUTRAL and then rotate your selector switch to 2 wheel drive then put in drive / reverse )
Your reverse lights don't work you don't have power back to the bulbs what is wrong an how do you fix it1988 ford bronco.?
There is a switch which is activated when the gear selector of a vehicle is moved into the 'reverse' position. This switch controls the power going to the back up lights. The switch is located somewhere adjacent to the gear selector linkage, so that it will be physically affected when the gear selector moves into the reverse position. This means that the switch location can be anywhere from the floor shifter mounting, or the steering column, to the transmission. A maintenance manual for your specific vehicle is available at most auto parts stores for under 20 dollars. This manual will give specific locations for this switch, along with instructions on how to do everything from jump starting the vehicle to rebuilding the engine, and is an essential item for any vehicle owner, I believe. There is a switch which is activated when the gear selector of a vehicle is moved into the 'reverse' position. This switch controls the power going to the back up lights. The switch is located somewhere adjacent to the gear selector linkage, so that it will be physically affected when the gear selector moves into the reverse position. This means that the switch location can be anywhere from the floor shifter mounting, or the steering column, to the transmission. A maintenance manual for your specific vehicle is available at most auto parts stores for under 20 dollars. This manual will give specific locations for this switch, along with instructions on how to do everything from jump starting the vehicle to rebuilding the engine, and is an essential item for any vehicle owner, I believe.
What is the switch on a guitar called?
pickup selector switch
What is the p for by the steering wheel of a 2002 ford explorer?
Do you mean the switch on the dash to the left of the steering wheel that shows OFF at the top and a " P " and small triangle at the bottom ? That is the switch to shut off the reverse sensing system ( park assist ) You can only shut off the reverse sensing system when the ignition is on and the gear selector is in reverse
How do you replace the fuel selector switch on a 1995 Ford F-250?
how do i replace the fuel selector switch on the dash of a 1995 ford f250
Why does your radio and windows stop working when you shift into reverse in my 97 mercury sable?
Change the mlps {aka} the nuetral safety switch or the selector switch on the transmission and that will fix the radio problem and the power steering problem it may have also.
What is OD Switch?
On the Ford Explorer , on the end of the automatic transmission gear selector lever ( park , reverse etc ) there is a push button that allows you to turn off the OVERDRIVE feature if you wish
Where is reverse switch on 1989 acclaim?
On a 1989 Plymouth Acclaim, the reverse switch is typically located on the transmission. It is usually mounted on the transmission case itself, near the gear selector. To access it, you may need to lift the vehicle and examine the transmission area, or consult the vehicle's service manual for specific details and diagrams.
What is RF selector switch?
RF refers to 'radio frequency'. A selector switch would select a different range of radio frequencies at each of its positions. RF selector switches would be found on short wave receivers and transmitters.
Where is the fuel tank selector switch located on a 1984 F-150?
The fuel tank selector switch can be found on the left side of the dash of a 1984 F-150. This is immediately next to the headlight switch.
