the timing window is directly beneath the air filter housing, you must move/remove the air filter housing to see it
A Chrysler LeBaron has a timing belt.
The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.
To set the timing on a 1995 Chrysler LeBaron, first ensure the engine is at top dead center (TDC) on the number one cylinder. Next, locate the timing marks on the crankshaft pulley and the timing cover. Align the marks according to the specified timing setting, which is typically around 10 degrees BTDC for this model. Finally, tighten the distributor hold-down bolt and recheck the timing to ensure it remains in the correct position.
For a 1984 Chrysler LeBaron with a 2.2 turbo engine, the timing marks are typically located on the crankshaft pulley and the timing cover. The timing mark on the crankshaft pulley aligns with a notch or pointer on the timing cover to set the ignition timing. The correct timing specification for this engine is usually around 10 degrees BTDC (Before Top Dead Center). Always refer to the specific service manual for precise details and adjustments.
It has a timing belt.
timing marks are , marks on camshaft sprocket, an on crankshaft sprocket'.
Auto-Repair-Manuals.com
Check your timing belt!
if it is a 2.5L it should be 12 degrees before t.d.c.
Chrysler LeBaron was created in 1977.
If you are aking about the timing marks on the belt/chain. Then yes.If you are aking about the timing marks on the belt/chain. Then yes.
It is under the plastic covers on the passenger side of the engine.