In the cab, in front of the drivers seat on the floor is a plug(roughly 3"x5" plate) that you remove to gain access to the master cylinder. Once that plate is removed you will see the cab that turn's off so you can add fluid.
DOT ( 3 ) brake fluid
DOT 3 is the fluid for you.
at the master cylinder on the right side behind the battery
how to change brake lines on a 1996 ford econoline e-150
A 1994 Ford Econoline Van uses standard Mercon type transmission fluid. This fluid is used extensively in most Ford vehicles.
A 1965 Ford F-250 typically uses DOT 3 brake fluid. This type of fluid is glycol-based and is compatible with the braking systems used in vehicles of that era. Always check the owner's manual or consult with a professional to confirm the appropriate fluid for your specific vehicle and any potential modifications.
To put brake fluid in a 1997 Ford Explorer, you must locate the brake fluid reservoir. Once you locate it, unscrew the cap, and replenish the brake fluid.
For a 1993 Ford Ranger : ( DOT 3 brake fluid )
Usually, the panel has fuses that are individually marked. This helps mechanics or automotive electricians know what each fuse is used for. On a 2005 Ford Econoline, the fuse for brake lights is fuse number 34.
The brake fluid reservoir
DOT 3 brake fluid
Transmission fluid is fine...dextron III