0
What else can I help you with?
How do you fill transmission fluid on 2000 Jeep Grand Cherokee Laredo?
You add the fluid down the dipstick tube.
When adding engine coolant to an 2003 Jeep Grand Cherokee Low Coolant indicator has come on do you add only to the reserve tank or to the actual radiator as well?
When you add engine coolant to a 2003 Jeep Grand Cherokee because the low coolant indicator has come on, you should add to the reserve tank and the radiator if they are low. Sometimes, just the reserve tank needs filled.
Where do you add oil in a 1992 Jeep Cherokee Laredo?
On my 1992 Jeep Cherokee Laredo it is on the front right of the engine. There should be a picture of an oil can on the cap with the words fill oil here or something along that line on it.
How much does it cost to replace the water pump in a 88 jeep cherokee Laredo?
The cost to replace the water pump in a 1988 Jeep Cherokee Laredo typically ranges from $300 to $700, depending on labor costs and whether you choose to use OEM or aftermarket parts. Labor charges can vary by location and shop, usually accounting for $100 to $300 of the total. Additionally, it's advisable to factor in the cost of coolant and any other necessary gaskets or seals, which may add to the overall expense.
What can you do to supe up your 95 jeep grand cheroke Laredo?
You can add ground effects or new and larger tires to soup up your 1995 Grand Cherokee Laredo. You can also add grill or headlight covers, a chip to give your engine more horsepower, or even a lift kit to this vehicle.
How much radiator fluid do I put in a 1990 Jeep Cherokee Laredo?
Drain and flush the system. Pour in one gallon of pure antifreeze, and then top it off with distilled water. This will provide protection to around -25 Degrees F. If adding fluid to an engine with low coolant, look for the stem sticking up in the inside of the coolant overflow reservoir and add enough 50/50 mix to reach the top of the stem.
How do you add coolant to a closed cooling system after flushing the radiator on a 1990 Jeep Cherokee?
Disconnect a hose and fill it through the hose. Possibly the one to the water pump; that should be pretty accessible.
Can you add remote starting system to a 2002 Jeep Laredo?
Yes, you can remote start any car.
Where do you I the engine coolant in a 1995 jeep Cherokee limited edition?
There's a plastic overflow tank in the engine compartment that you use to check the coolant level (add and full marks on the tank), and to add additional antifreeze if its low. It typically has a big black lid on the top and is marked showing that its coolant. You can open this with the engine hot to add coolant....do not remove the radiator cap while the engine is hot. Do not mistake the coolant tank with the windshield washer fluid tank. Both are clearly marked.
How heavy is a 1999 Jeep Cherokee?
around 3669 lb, add more with 4x4
How do you add freon to a 1996 grand jeep Cherokee?
Jeep Grand Cherokee cooling system through the low port on the air conditioning compressor. Connect your Freon bottle to the port and discharge.
Where is the radiator cap located on the 1990 Jeep Cherokee How do you add coolant with only uncapping the overflow and no radiator cap?
I believe the 1990 year still had the sealed system. So there is no rad cap. You can add fluid by pourig it into the overflow bottle with the vehicle running the coolant will be sucked into the system. No radiator cap exist in the 90, 91 model. You add the coolant to the coolant container (The coolant container cap is the equivalent of the radiator cap, (pressure device))and the palstic container is under pressure all the time. Be carefull when you want to open it after the car has been running. After those year models, Jeep discontinued the use of the pressure container and went back to tha radiator cap and remove the pressure coolant container.
