There is only one washer fluid bottle. Both the front and rear windows use the same bottle. If your rear washer isn't working it's probably because the hose has cracked or split somewhere along its path and the water never gets to the rear nozzle.
The washer fluid reservoir for a 1994 Geo Prizm is located in the engine compartment on the passenger side. In 1994, it was located right behind the headlamp on the passenger side.
Mounted directly along side the winshield washer fluid tank.
on my 93 its in front of radiator drvers side
The clutch system uses DOT 3 brake fluid.
On a 1994 Mitsubishi Eclipse, the windshield washer pump is typically located in the engine compartment, mounted on the washer fluid reservoir. To access it, you'll need to remove the reservoir, which is usually situated near the driver's side of the engine bay. The pump itself is often located at the bottom of the reservoir and connects to the washer fluid hoses.
DOT 3 or DOT 4
No, do not mix trans and brake fluids. The trans is dextron and the brake fluid is dot3.
Mopar ATF
Ceck out "what type of automatic transmission fluid is needed for a 1993 Jeep Cherokee sport and in the front and rear differential" on wiki-answers
The manual transmission in a 1994 Cherokee uses 80 W 90 gear oil, not ATF.
There are a few problems that can be causing the lack of moisture to the rear window: Clogged Nozzle, Plugged Hose, No Fluid in the Bottle, Bad Pump. Ask yourself this question, is the Front Sprayer working?
To change the windshield washer pump on a 1994 Isuzu Trooper, first, locate the pump, which is typically mounted on or near the washer fluid reservoir. Disconnect the electrical connector and the fluid hoses from the pump, then remove any mounting screws. Install the new pump by reversing the disassembly steps, ensuring the hoses are securely attached and the electrical connector is reconnected. Finally, refill the washer fluid reservoir and test the system to ensure proper operation.