To add oil to a 1997 Ford E350, locate the oil filler cap on the top of the engine, which is typically marked with an oil can symbol. Unscrew the cap and use a funnel to pour in the appropriate type and amount of engine oil, checking the dipstick for the correct level. After adding oil, replace the cap securely and run the engine briefly to ensure proper circulation. Always check the owner's manual for specific oil capacity and specifications.
SAE 10w30
According to the 1997 Ford Expedition Owner Guide ( 5W-30 ) * with engine oil filter change , 6.0 U.S. quarts of 5W-30 engine oil
It depend on what oil do you like using. I personally used Castrol 10W40. On my 1998 Ford Expedition XLT.
To add oil to a Ford E350 van, open the hood and locate the oil filler cap, which is typically marked with an oil can symbol. Remove the cap and use a funnel to pour the appropriate type and amount of engine oil into the opening. It's important to check the oil level using the dipstick to ensure you don't overfill. Always refer to the owner's manual for specific oil specifications and capacity for your model year.
take the old ones off and put the new ones on
the oil is called type F it was originaly made for ford motors but most people put it in the blaster
I have a 460 in my 1983 e350.
NO
put it in
where do you put transmission oil in on a 2003 ford rangers standard
Approx 8 quarts. Put 7.5 in and check the dip stick. Best -
According to the 1997 Ford Contour Owner Guide : With engine oil filter change : The 2.0 liter four cylinder engine takes ( 4.5 U.S. quarts of 5W-30 ) The 2.5 liter V6 engine takes ( 5.5 U.S. quarts of 5W-30 )