0
The power antenna is raised & lowered using a nylon cord with teeth on it, the motor simply has a gear that is meshed with the teeth on the cord. Over time, the teeth on the cord get stripped, or the cord itself breaks, or both. The antenna with the cord can be replaced for a relatively small sum. Talk to an experienced car stereo professional, they see this kind of thing all the time and shouldn't take long to fix. First is the fuse, but probably it's the nylon strip with teeth that is stripped inside the motor. If the motor makes noise then it's the strip with teeth which can be replaced, the part is around $20.00 but you have to install it or have someone else do it. It's cheaper than buying a whole new antenna, but check the fuse first.
What else can I help you with?
How do you troubleshoot a RV refrigerator?
You start by figuring out what your issue with it is. Troubleshooting for a bad smell and troubleshooting for a lack of refrigeration are not going to be one in the same.
Why won't your power antenna go down on your 1987 corvette?
DO YOU HEAR ANY KIND OF NOISE WHEN HITTING THE SWITCH? HAVE YOU TRIED ANY TYPE OF LUBE? I WOULD ALSO SEE IF THERE IS POWER GOING TO THE ANTENNA WITH A LIGHT TESTER. START WITH THE SIMPLE THINGS FIRST. CHECK YOUR FUSE.
1993 Oldsmobile cutlass supreme power antenna will not turn off or go down?
First physical pull the antenna all the way up, clean the antenna very good with a degreaser, then lubricate it with a silicon spray. Open the trunk, unplug the power to the antenna, start your car with the radio turned on, stop the engine, plug the power source to antenna back in. Try it now, if you still have the same problem, either the relay is stuck and needs replacing or the antenna motor is shorted and needs to be replaced.
How do you replace power antenna in 91 caprice?
To replace the power antenna in a 1991 Chevrolet Caprice, start by disconnecting the negative battery terminal to ensure safety. Remove the interior trim panel adjacent to the antenna, then unscrew the old antenna from its mounting location. Disconnect the wiring harness and remove the antenna assembly from the vehicle. Install the new antenna by reversing the process, connecting the wiring harness, securing it in place, and reattaching the trim panel before reconnecting the battery.
Why does power seat no longer work in Pontiac Grand Prix?
Because something's wrong with it, obviously. To narrow down the causes, you're going to need to do some troubleshooting. I'd start by finding the relay which goes to the power seats, and test it for resistance. If that checks out, I'd look at the electric motor.
How do you start PowerPoint?
you start a power point by going to Microsoft Office if you have it.
Who you is at the power station when things start going wrong?
haca
Looking for a troubleshooting guide for a durabuilt pressure washer 1404?
For troubleshooting your Durabuilt Pressure Washer 1404, start by checking the power source and ensuring the unit is plugged in and the outlet is functioning. If the pressure washer won't start, inspect the power cord for damage and check the reset button. For issues with low pressure, examine the nozzle for clogs, ensure the water supply is adequate, and check the hose for kinks. Consult the user manual for specific error codes and detailed troubleshooting steps tailored to your model.
What can cause a 2002 Impala to not start?
what does it do? see discussion board there is no power to the fuel pump i just changed the fuel pump and power is going to it there no power going to the coils why is that
2014 Nissan nv troubleshooting?
a have problems to start when it is cold
In which troubleshooting approach do you start with the physical elements of the network?
bottom up
In which troubleshooting approach do you start with the end-user application?
Top-down
