where does your PVC valve hose hook up to from the valve cover on a 6 l motor
It hooks up to the vacuum ports on the carb or intake.
The 2005 Chevrolet Up to land or PCV valve can be found near the back of the engine. The PCV valve will be behind the air cleaner housing.
the pcv valve is on the back right of the valve cover if not get one
The engine will have difficulty in performing correctly!!
The PCV valve on a 2006 Chevy Trailblazer is located on the top, left side of the engine. It allows gases which are built up in the engine to be recirculated.
1998 and newer 2.2L engine does not have a serviceable pcv valve.
The PCV valve on a 2006 Toyota Sienna is located along the side of the top of the engine. It allows gases which are built up in the engine to be removed and recycled.
The PCV valve on a Mazda 6 V6 is located on the valve cover near the back of the engine. The PCV valve is usually a plastic or metal part that looks like a small tube sticking up out of the valve cover.
The PCV valve is stuck in the valve cover on the passenger-side of the car. It just pulls up and out to change it.
On the bottom inside next to the engine on the air intake there is a elbow there that can become bad and make a air leak
A PCV valve is for positive crankcase ventilation. It is to keep crankcase pressure from building up in the engine. If it does it can cause seal leakage, air filter contamination and engine blowby.
Perhaps it is your pcv valve or rubber elbow connector that is hooked up to the pcv valve.