0
Where does the PCV valve hose start and end on a 1984 Honda Prelude with dual carb?
I really don't know about the dual carb set up but it generally starts in the valve cover and ends at the pcv valve which is screwed in the intake manifold. The pcv valve is under the carbs. If you look up from the bottom of the car there is a black box right next to the oil filter. There is a hose from the oil pan to the bottom of this black box. On the top of the box is another hose that connects from the black box to the engine. If you take off the top hose to the black box the pcv valve is mounted in the top of the box.
What else can I help you with?
How do you adjust the flooded carburetor on a 1984 Honda Prelude?
How to you syncronize a 1984 honda prelude carburator?
What is the make and model of a 1984 Honda Prelude?
Make: Honda Model: Prelude... what are you really asking?
Where is the fuel pump located on a 1984 Honda Prelude?
The fuel pump is located in the fuel tank on a 1984 Honda Prelude. The gas tank will need to be taken down to access the fuel pump.
Where is spark plug located 1984 Honda prelude?
in the front of the block.
What is the valve clearance on a 1984 Honda XR500R?
intake .004" exhaust .005" is the correct valve clearence for a 1984 xr500r.
What are the valve clearances for 1984 trx 200 Honda?
the valve clearances is 3000 of a ince
What is the valve clearance on a 1984 Honda 200S ATC?
the valve clearance is 0.002" on both intake and exhaust.
What are the valve clearances on 1984 Honda 750?
Output 0,7 and 0,35 on the intake if Im not misstaken. --
Will a 1989 Prelude front bumper fit on 1984 Prelude?
No. The 1989 Prelude's body style is different, and a little larger, than the 1984 body style.
Where is the PVC valve on a 1984 Honda civic hatchback do you need to remove the air filter housing?
the PVC valve is by the condigulam and to find that you need to eat crap
Why is gas pouring into the air cleaner on a 1984 Honda Prelude?
Assuming it's a carburated engine, the problem is a stuck needle and seat inside the carburetor. If everything else is ok, just remove the top of the carburetor and replace the needle and seat.
What is the valve clearance on a Honda XR350R 1984?
Intake is .002-.004 inches and exhaust is .006-.008 inches when cold.
