under the distributor cap. it is black plastic and has 2 small screws in it
New answer: Sorry but that year did not use an ignition module. It use a crank senser and cam senser.
If this is a S10 with the 4.3 L engine, it has an ignition module and it is attached to the bracket that also holds the ignition coil on the passenger side of the engine.
If this is the 4.3 engine, it is located on the bracket next to the ignition coil.
The 1999 Chevy S 10 pickup truck ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
where is the pcm module located on my 1997 Chevy truck
The 1989 Ford Ranger pickup truck ignition module is located on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
The ignition module is located in the distributor
A bad ignition module.
jerky
The engine computer is the ignition module. It is the large black box under the hood.The engine computer is the ignition module. It is the large black box under the hood.
Igniter? is your Toyota jet powered? Your coil pack is located on the driver side fender as well as the ignition module.
Take the electronic ignition module to advance auto parts have it tested for free
Ignition system is controlled by Vehicle Control Module (VCM). The VCM monitors the information from various engine sensors, computes the desired spark timing and controls the dwell and firing of the ignition coil via an (IC) line to the ignition control module. Hope this helps.
can a chevy truck with a 350 engine with a tbi cause detonation and pre- ignition?