In the same place as it is on every other V6 engine built in the world!!! On top of the engine, between the heads, under the throttle body.
There is 2 of them on that engine and there both underneith the intake manifold. YOU MUST REMOVE THE INTAKE to get to them.
knock sensor location is under the intake manifold you have to remove intake their is two knock sensors front and rear
Below the Intake Manifold. (can't be seen)
What are the torque specs for 99 ford ranger 3.0L intake manifold?
It is under the intake manifold.
On a 1999 Camaro, the map sensor is located on the back of the intake manifold. The intake manifold is the series of tubing that distributes the air coming into the engine.
It is the box with the four screws under the duratec labled black casing right in front of the intake manifold. There is a black cable comming from it.
there is no lower intake gasket, only a front and rear gasket
Not an easy job.You need to remove the intake manifold plenum to do it.
Try cleaning the Intake Manifold where the EGR valve is attached.
underneath the intake manifold on the drivers side
It is in the back of the intake manifold, by the fire wall.