0
What else can I help you with?
Is there an o ring in the fuel line of 2000 Chevy Malibu?
Yes on both lines one go to the gas rail the other to the regulator
Where is the fuel pressure valve cap on a 1999 Chevy Malibu?
If it has one, it will be located on the fuel rail.
Where is the fuel rail on a 2000 Chevy S-10?
The 2000 S10 with a 4.3L engine doesn't have a fuel rail.
2000 Chevy Malibu almost turns over but will not start Could it be the fuel pump?
Have you checked to see if you hear the pump when you turn on the key? Also check to see if you have fuel pressure on the test valve located on the fuel rail.
How do you know if the fuel pump is bad on 2002 Chevy Malibu?
check the fuel pressure it should be at like 35 to 40 psi its like 30$ for a tester the tester hooks up on the fuel rail my 98 Chevy Malibu was only pushing 18 psi replaced it car runs great
Where is the pressure regulator in a 02 Chevy Malibu 3.1?
the fuel pressure regulator is on the top front fuel rail facing the engine in front,, it is on the right end of the rail, it has a hose to it and it is round. it is held on by one bolt and the fuel line. good-day !
Where is the fuel filter located on a Chevy Monte Carlo?
On a 2000 Chevy Monte Carlo it is along the frame rail on the drivers side
What could cause a fuel leak under upper intake on a 2001 Chevy Malibu 3100 V6 engine?
fuel rail leaking or on the fuel side of rail there is a "O" ring in line to seal it from leaks. if it is leaking, release fuel pressure from system, take out main fuel line to fuel rail and replace "O" ring on end of line.
How do you replace a fuel system regulator on a 2000 Chevy Cavalier Z24?
Remove the fuel rail.It is on the end of the fuel rail with a vacuum line attached.
Where is the fuel filter located on a 2000 Chevy Silverado 4wd?
Inside the main frame rail on the driver side of the vehicle.
Are there gaskets for the fuel rail of a 2001 Malibu?
no gaskets, just "O" rings.
How do you remove fuel injectors from fuel rail on 01 Malibu?
To remove fuel injectors from the fuel rail on a 2001 Chevrolet Malibu, first ensure the engine is cool and relieve the fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls. Then, disconnect the fuel lines and electrical connectors from the injectors. Remove the bolts securing the fuel rail to the intake manifold, gently lift the rail, and pull out the injectors from the rail. Be careful to avoid damaging the O-rings during removal.
