0
Remove the engine shroud and locate your air intake on the left hand (passenger) side of the engine. Follow the intake to the point that it connects to the throttle body. Directly behind this connection between the throttle body and the firewall you will find the throttle position sensor. The electrical clip has a housing on it that needs to be removed before you can remove the switch. Remove the engine shroud and locate your air intake on the left hand (passenger) side of the engine. Follow the intake to the point that it connects to the throttle body. Directly behind this connection between the throttle body and the firewall you will find the throttle position sensor. The electrical clip has a housing on it that needs to be removed before you can remove the switch.
What else can I help you with?
Where is the crankshaft positioning sensor on 2003 Kia Sorento?
Can someone anyone please tell me where is the Crankshaft Positioning Sensor on a kia sorento 2005 and I also need a diagram
What is a IAT sensor on a 2007 Kia Sorento?
Air Intake Temperature Sensor part and location for 2007 Kia Sorento.
Where is the throttle positioning sensor on a 2004 Kia Sorento?
When facing the engine on the left side is a large black tube. Follow the tube as far away from you (towards the interier of the vehicle) until it comes to an end. At that point the sensor is easily viewable. It is about three or four inches and has a small locking clip.
Where is the camshaft position sensor on a 2006 Kia Sorento?
do you need to take off the timing belt to replace a camshaft position sensor on a 2006 kia sorento
How do you replace a 2003 Kia Spectra throttle position sensor?
How to replace throttle sensor kia spectra 2003
Do 2007 Kia Sorento throttle position sensor have to be adjusted after installed?
No, the throttle position sensor (TPS) on a 2007 Kia Sorento typically does not require adjustment after installation. It is designed to be a plug-and-play component, meaning it should function correctly once properly connected. However, it is essential to ensure that the sensor is installed correctly and that any related electrical connections are secure. If the vehicle experiences issues after replacement, further diagnostics may be necessary.
What would cause a 2001 KIA Rio to stall when the RPM's hit 1000?
Maybe a throttle positioning sensor? Is it hard to start? Does it start then stall?
Can the Kia Sorento crankshaft pulley bolt damage the crank sensor?
Others have had problems with the crankshaft pulley bolt on their Kia Sorento damaging the crank sensor. This can happen if the bolt breaks. The timing belt can be damaged as well.
How do you replace the map sensor 0n a 2004 Kia Sorento?
To replace the map sensor on a 2004 Kia Sorento, first ensure the engine is off and disconnect the negative battery terminal. Locate the MAP sensor on the intake manifold, usually near the throttle body, and disconnect the electrical connector. Remove the mounting bolt(s) and carefully pull the sensor out. Install the new sensor by reversing the steps: insert it into place, secure it with the bolt, reconnect the electrical connector, and reattach the battery terminal.
How do you know when the crankshaft position sensor is going bad on your Kia Sorento?
A bad crankshaft position sensor will cause your Kia Sorrento to run rough. The bad crankshaft position sensor can also cause your Kia to not start.
Why does the idle go up to 3000 rpm in neutral 97 standard Kia sport-age HOW CAN I FIX IT?
First I would take it to an suto parts store like Advance - they have a computer you can hook it up to for free. If a code such as p0101 comes up then it could be the Mass air flow sensor, oxygen sensor or the throttle positioning sensor. It is most likely the TPS. Replace the throttle positioning sensor - usually about 59 dollars at Advance - must be ordered. If it's not that then check the throttle cable itself, it can be adjusted if it's loose.
When was Kia Sorento created?
Kia Sorento was created in 2002.
