Call a dealer
Yes alot of alarm system disable the ignition one way or another some by turning of the 12 volt to the ignition some by killing the 12 volt to the starter motor.
The factory alarm is disarmed by unlocking the doors with a key or remote.
If you are talking the FACTORY alarm system on a 2000 Ford Explorer there is no glass break sensor , you have to open a door to set off the armed alarm system after the glass is broken
What is your problem? Is it because the alarm goes off for no reason? If it is I had the same problem and can help you.
We are having the same problem on a 2000 Corvette, were you able to figure it out?
To set the car alarm for a 2000 Mitsubishi Galant, first ensure all doors are closed. Use the key fob to lock the doors, which typically activates the alarm system. If your vehicle has a manual alarm system, turn the key to the lock position in the driver's door, which should also engage the alarm. Wait for the indicator lights to flash, confirming that the alarm is set.
It should be under the drivers seat
The flasher unit on a 2000 Corvette is built into the emergency flasher unit in the console.
The fuse for the alarm system in a 2000 Kia Sephia is typically located in the fuse box, which is found under the dashboard on the driver's side. You can identify the specific fuse for the alarm system by checking the diagram on the fuse box cover or referring to the owner's manual for details. Look for a fuse labeled for the alarm or security system. Always ensure the vehicle is off before checking or replacing fuses.
To disable the alarm on a 2000 Ford Taurus, insert the key into the driver's side door lock and turn it to the unlock position. This should deactivate the alarm. If the alarm persists, try starting the vehicle with the ignition key, as this can also reset the alarm system. If issues continue, consult the owner's manual or a professional for assistance.
if you modify the frame it will