just above the alternator wheel. there is a square hole on the top side of the tensioner.
To change the alternator on a 1984 Oldsmobile 98, first disconnect the negative battery cable to ensure safety. Remove the drive belt by loosening the tensioner or adjusting the alternator's position. Disconnect the electrical connectors from the alternator, then unbolt it from the engine. Install the new alternator by reversing these steps, ensuring all connections are secure and the drive belt is properly tensioned.
Where is the speed sensor located on a 1997 Oldsmobile Aurora
To change the alternator on a 1998 Oldsmobile Silhouette, first disconnect the negative battery cable to prevent electrical shock. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mount. Disconnect the wiring harness and the alternator itself, then install the new alternator by reversing the steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.
Where is the tensioner
change bulbs in gear selector of 2001 oldsmobile aurora
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Remove the intake manifold. The starter is underneath.
Wilson the tensioner pulley and remove the alternator belt. Remove the wiring to the alternator. Remove the alternator retaining bolts. Remove the alternator and replace with a new alternator.
Remove the alternator belt by loosening the tensioner pulley. Remove the wiring from the alternator. Remove the retaining bolts to the alternator. Reverse the process to install the new alternator.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
To change the idler pulley on a 1997 Oldsmobile Aurora, first, disconnect the negative battery cable to ensure safety. Then, remove the serpentine belt by using a wrench to relieve tension on the tensioner pulley. Next, unbolt the old idler pulley from its bracket, replace it with the new pulley, and secure it in place. Finally, re-install the serpentine belt, ensuring it's properly aligned, and reconnect the battery.